Murphy PV1000 Installation Manual

00-02-0599 07-19-07 Section 78 PowerView™ Model PV1000 Hardware Installation Manual

Section 78 00-02-0599 07-19-07 - 6 - NMEA Wiring NOTE: The NMEA wire harness contains blocking pins that only allow the cable to be connected to

Section 78 00-02-0599 07-19-07 - 7 - PVA Gages NOTE: Port B and C connectors are keyed differently than Port A and D connectors to ensure proper

Section 78 00-02-0599 07-19-07 - 8 - Pin Specifications for Deutsch DT04-6P Style Connections

Section 78 00-02-0599 07-19-07 - 9 - Wiring Schematic

Section 78 00-02-0599 07-19-07 - 10 - Specifications Electrical Display 6.4” Color transmissive TFT LCD Resolution VGA, 640 x 480 pixels Orien

Section 78 00-02-0599 07-19-07 - 11 - Environmental Operating Temperature -40º C to +85º C Storage Temperature -40º C to +85º C Protection IP68

MURPHY, the Murphy logo, PV1000 and PowerView are registered and/or common law trademarks of Murphy Industries, Inc. This document, including tex

In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any

Table of Contents Product Information...

(THIS PAGE INTENTIONALLY LEFT BLANK)

Section 78 00-02-0599 07-19-07 - 1 - Product Information The PowerView™ display is designed for instrumentation on electronically controlled engin

Section 78 00-02-0599 07-19-07 - 2 - Hardware Installation The following instructions will guide you through installing the PowerView display. Das

Section 78 00-02-0599 07-19-07 - 3 - Gimbal Mount Installation Tools Needed • Flathead or Phillips Screwdriver (depending upon screws used for mo

Section 78 00-02-0599 07-19-07 - 4 - Wiring Instructions The following illustrations are examples of various typical quick-connect options for 1 o

Section 78 00-02-0599 07-19-07 - 5 - Dual Engine Static Addressing NOTE: Port A and B have different connector keys to ensure proper connection