Rev 09-10-08 00-02-0605 Catalog Section 78 PowerView™ Model PV-101 User’s Guide
00-02-0605 - 6 - Rev 09-10-08 2. Touching the Arrow Keys will move the selection bar to other menu items.
00-02-0605 - 7 - Rev 09-10-08 3. Certain menus have multiple pages of items. Scrolling past the top item or bottom item on the current page will r
00-02-0605 - 8 - Rev 09-10-08 4. When the desired item is highlighted by the cursor, pressing Enter will select that item and display the correspo
00-02-0605 - 9 - Rev 09-10-08 Operation PowerView Menus (First Time Start Up) 1. When power is first applied to the display, the Murphy logo appea
00-02-0605 - 10 - Rev 09-10-08 2. If the Engine ECU is broadcasting a 'Wait To Start' message, this screen will be shown. Engine manufac
00-02-0605 - 11 - Rev 09-10-08 3. Once the engine has started, the single engine parameter appears with the engine RPM displayed. Pressing the Rig
00-02-0605 - 12 - Rev 09-10-08 Setting Up the Display The screen may be configured to display a single engine parameter (1-up display), or four par
00-02-0605 - 13 - Rev 09-10-08 1-Up Display Settings 1. Touch Menu and use the Arrow Keys to highlight SETUP 1-UP DISPLAY, then press Enter. 2. To
00-02-0605 - 14 - Rev 09-10-08 6. Continue to scroll and select additional parameters for the CUSTOM 1-UP DISPLAY. Touch Menu at any time to retur
00-02-0605 - 15 - Rev 09-10-08 4-Up Display The 4-up display places the parameter data into four areas of the screen known as quadrants. Factory de
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any
00-02-0605 - 16 - Rev 09-10-08 5. Touch Enter and a list of parameters will appear. The parameter that is highlighted is the selected parameter fo
00-02-0605 - 17 - Rev 09-10-08 8. The parameter in the selected quadrant has changed to the parameter selected in the previous screen. 9. Repeat
00-02-0605 - 18 - Rev 09-10-08 Main Menu Options This section describes the features listed on the main menu of the PowerView. These menu options a
00-02-0605 - 19 - Rev 09-10-08 Backlight Adjustment ADJUST BACKLIGHT allows you to select the desired backlight intensity. Contrast Adjustment From
00-02-0605 - 20 - Rev 09-10-08 Faults and Warnings The PowerView provides two means for detecting faults and warnings: visual LEDs on the casing (S
00-02-0605 - 21 - Rev 09-10-08 Auxiliary Gage Fault Murphy’s PVA Gages can be attached to the PowerView. If an auxiliary gage should fail, the 1-u
00-02-0605 - 22 - Rev 09-10-08 Acknowledging Fault Codes 1. To acknowledge and hide the fault and return to the 1-up or 4-up display, touch Enter
00-02-0605 - 23 - Rev 09-10-08 Utilities Menu The following steps take place starting at the UTILITIES menu option. 1. GAGE DATA - View informatio
00-02-0605 - 24 - Rev 09-10-08 being used. Most engine ECU’s use Version 4, therefore in most cases adjustment of this menu option will not be requ
00-02-0605 - 25 - Rev 09-10-08 Modbus® Setup 1. From the UTILITIES menu, select MODBUS SETUP. 2. Select either the SLAVE ACTIVE (SCADA or remote
Table of Contents Introduction ... 1 Engine and Transmission Parameters 2
00-02-0605 - 26 - Rev 09-10-08 Selecting Engine ECU 1. From the UTILITIES menu, choose SELECT ENGINE ECU. 2. The message “LISTEN TO ECU: ALL” is
00-02-0605 - 27 - Rev 09-10-08 Troubleshooting “WAIT TO START PREHEATING” is displayed The ECU is broadcasting a 'Wait To Start' message.
00-02-0605 - 28 - Rev 09-10-08 “NO STORED CODES” is displayed The PowerView sent a request to the ECU for Stored Fault Code (DM2) information, and
00-02-0605 - 29 - Rev 09-10-08 “DATA ERROR” is displayed in place of a parameter value The ECU is sending a message that there is a data error with
00-02-0605 - 30 - Rev 09-10-08 NOTES
Murphy, the Murphy logo, and PowerView are registered and/or common law trademarks of Murphy Industries, Inc. This document, including textual matte
www.fwmurphy.com/products/murphylink/powerview.htm
(THIS PAGE INTENTIONALLY LEFT BLANK)
00-02-0605 - 1 - Rev 09-10-08 Introduction Congratulations on purchasing your PowerView display, a multifunction tool that provides a window into t
00-02-0605 - 2 - Rev 09-10-08 Engine and Transmission Parameters The following are some of the engine and transmission parameters which may be disp
00-02-0605 - 3 - Rev 09-10-08 Faceplate Features
00-02-0605 - 4 - Rev 09-10-08 Navigation and Keypad Functions The keypad on the PowerView display is a capacitive touch sensing system. There are n
00-02-0605 - 5 - Rev 09-10-08 Basic Navigation 1. When Menu is pressed, the main menu items are displayed.
Comments to this Manuals